Lexus LS 460 - Page 136

136
5. SETUP
LS460_600h_Navi_U
3 Select an arrow to adjust the direction of
the current position mark and select
“OK”.
■ TIRE CHANGE CALIBRATION
1 Select “Tire Change”.
 The message appears and the quick dis-
tance calibration starts automatically.
The tire change calibration function will
be used when replacing the tires. This
function will adjust miscalculation
caused by the circumference difference
between the old and new tires.
INFORMATION
●If this procedure is not performed when
the tires are replaced, the current posi-
tion mark may be incorrectly displayed.