Lexus LS 460 - Page 135

135
5. SETUP
LS460_600h_Navi_U
NAVIGATION SYSTEM
3
1 Display the “Detailed Navi. Settings”
screen.
(P. 1 32)
2 Select “3D Map Viewing Angle”.
3 Select “Up” or “Down” to change the
viewing angle.
“Default”: Select to set the initial angle.
1 Display the “Detailed Navi. Settings”
screen.
(P. 1 3 2)
2 Select “Calibration”.
3 Select the desired item.
■ POSITION/DIRECTION CALI-
BRATION
1 Select “Position / Direction”.
2 Scroll the map to the desired point (P.
84) and select “OK”.
CHANGING VIEWING
ANGLE OF 3D MAP
CURRENT POSITION/TIRE
CHANGE CALIBRATION
The current position mark can be adjust-
ed manually. Miscalculation of the dis-
tance caused by tire replacement can
also be adjusted.
 For additional information on the accu-
racy of a current position: P. 1 40
When driving, the current position mark
will be automatically corrected by GPS
signals. If GPS reception is poor due to
location, the current position mark can
be adjusted manually.