G FINAL INSPECTION
86
2007MY LS460L/LS460
G01. SET THE ECT AND AIR
SUSPENSION
*
SWITCHES
Set the ECT, vehicle height control
and damping mode select switchs
to the normal mode to provide the
customer the best driving conditions
(stability, control and ride comfort).
G02. REMOVE INTERIOR
PROTECTIVE COVERS, ETC.
Remove the remaining plastic cov-
ers from the driver knee airbag,
front passenger knee airbag, side
trim, seats, head restraints, console
box cap, vanity lights and sun vi-
sors as required. Remove any un-
necessary labels, tags and stickers.
It is recommended that the interior
protective covers be removed just
before delivery of the vehicle to the
customer.
Note: If the interior color is light
white for some vehicle, plastic cov-
ers will be set for front, center and
roof side garnishes.
G03. PDS CHECKSHEET AND
PRODUCT REPORTS
Check the appropriate boxes when
noting any product / quality issues
and sign the P DS checksheet.
a) Submit one copy of the check-
sheet to your area office.
b) Submit product technical reports
regarding product / quality issues
as applicable.
G01
G02
LS10045
G03
LS460/460L
PDS CHECK
SHEET
*
Optional equipment
1. ATTACH THE FOLLOWING PRINTOUTS
TO THE PDS CHECK SHEET:
- BATTERY CHARGE PRINTOUT
- TIRE PRESSURE PRINTOUT
- ECU HEALTH CHECK PRINTOUT
See back of PDS Check Sheet for printout
examples.
2. COMPLETE AND SIGN THE PDS CHECK
SHEET, AND FILE CHECK SHEET WITH
PDS REPAIR ORDER.
3. SUBMIT PRODUCT TECHNICAL
REPORTS REGARDING QUALITY ISSUES
AS APPLICABLE.
To Next Page
Loading...
