EasyManua.ls Logo

Lexus LS 460L - Brake Fluid Level

Lexus LS 460L
120 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
D. UNDER THE HOOD (Conti nued)
64
2007MY LS460L/LS460
D01. ENGINE HOOD RELEASE
LEVER
Check that the opening and closing
of the hood is smooth and that the
latch operates properly using the
hood release lever.
D02. ENGINE O IL LEVEL
(ENGI NE NO T RUNNI NG)
a) Remove the engine oil dipstick
and wipe it clean. Reinsert the
dipstick and pull it out to check
the oil level. The level should be
between the two marks.
b) Check for dirt or impurities in the
oil.
Note: If the oil level is too low, add
specified engine oil and check for
oil leaks.
D03. BRAKE FLUID LEVEL
Visually check the fluid level
through the reservoir. If low, replen-
ish the brake fluid reservoir with
FMVSS No.116 DOT 3 or SAE
J1703 brake fluid and check for
fluid leaks.
Brake fluid level should be the
“MAX” line (within 0.2 in. [5 mm]
below).
Note: Re fer to the Repair Manual
for fluid specifications.
D04. ENGINE CO OLANT LEVEL
Visually check the coolant level
through the coolant reservoir tank
when the engine is cool. The cool-
ant level is suitable if the level is
between the “FULL” and “LOW”
lines on the tank.
CAUTION:
To prevent burning yourself, do not
remove the radiator cap when the
engine is hot.
D01
D02
Add Oil O.K. Too Full
D03
LS10070
D04
LS10035

Related product manuals