B. VEHICLE I NTERIOR (Continued)
31
2007MY LS460L/LS460
Using the door lock switch:
Do not carry more than one
key (including a card key)
when recording. While press-
ing “1”, “2” or “3”, push the
lock or unlock side on the
door lock switch until the sig-
nal beeps.
2. Check the setting is correctly
recalled.
When the doors are unlocked
using the entry function or
wireless remote control and
the driver’s door is opened,
the stored driving position is
recalled.
B11. REAR SEAT POSITIO N M EMORY
SYSTEM
*
With the engine switch in the “IGï
ON” mode and the shift lever in “P”,
check the operation.
a) Adjust the rear seat to the de-
sired position.
b) Press the “SET” button until the
beep sounds.
c) Press the “M” button to make
sure that the memorized settings
is correctly recalled.
d) Check that the seat return func-
tion works properly when the
door is opened.
B12. POWER WINDOW S AND DOOR
LOCKS
a) With the engine switch in the “IG-
ON” mode, operate the power
window switch on each door.
Check that the power window up
and down operation is smooth.
b) Check that the windows (other
than the driver ’s window) cannot
be operated when the power win-
dow lock switch is on.
c) Check operation of the power
door lock switches on the driver’s
and passengers’ doors.
d) With the doors closed, check that
the power windows can be oper-
ated after the engine switch has
been selected in the “ACC” or
“OFF” mode.
B11
B12
LS0051
Operation Switc h Window
Up
Down
*
Optional equipment
To Next Page
Loading...
