iPECS-MG Hardware Description and Installation Manual Issue 1.1
DECT INSTALLATION August, 2010
81
After changing the Country Code, you must reset the System,
Press the TRANS/PGM button
Dial 499
Press Flexible button 2
Press HOLD/SAVE button.
The System will proceed to initialize the database with the new Country Code. Once initialized and
operating normally, change the position of the MPB mode switch to the ON position. With
initialization complete, the iPECS-MG can be configured to meet the needs of the business and
individual user. For detailed information on programming the iPECS-MG, refer to the iPECS-MG
Admin Manuals.
To Next Page
Loading...