LG DR7400 - Editing a Title by Chapter; Adding Chapter Markers

41
Editing
Editing a Title by Chapter
The [Chapter Edit] menu is where you can add/delete
chapter mark and use other function for chapter.
1. Use b / B / v / V to choose a title on the [Edit]
menu then press ENTER.
The menu options appears on the right side of the
screen.
2. Select [Chap Edit] option then press ENTER from
the options on the menu.
The [Chap Edit] menu will appear.
3. Use b / B / v / V to choose a chapter on the
[Chap Edit] menu then press ENTER.
Repeat this step to select additional title.
The menu options appears on the right side of the
screen.
[Title] Returns to [Edit] menu.
[Play] Play backs the chapter.
[Add Mark] Adds chapter mark. (See page 41.)
[Del Mark] Deletes chapter mark. (See page 42.)
[Hide] Hides chapter mark. (See page 42.)
4. Use b / B / v / V to choose an option then press
ENTER from the options on the menu.
Adding Chapter Markers
You can create chapters within a title by inserting
chapter marks at the desired points.
1. Use b / B / v / V to choose a chapter on the
[Chap Edit] menu then press ENTER.
The menu options appears on the right side of the
screen.
2. Select [Add Mark] from the options.
3. Press ENTER. The menu appears as shown
below.
4. Use play, pause step, search and slow-motion to
find the scene you want.
5. Press CHP. ADD to add chapter mark.
6. Repeat step 5 to continue to add chapter from the
menu.
Note:
Chapter markers are inserted at regular intervals
automatically. You can change this interval from the
Initial Setup menu (see “Chapter Mark” on page 14).