Dimmer
Press SLEEP once. The display window will
be darken by half. To cancel it, press SLEEP
repeatedly until dim o.
Turn off the sound temporarily
Press MUTE to mute your unit.
You can mute your unit in order, for example,
to answer the telephone, the “MUTE” displayed
in the display window.
Screen Saver
The screen saver appears when you leave the
unit in Stop mode for about ve minutes.
System Select - Optional
You must select the appropriate system mode
for your TV system. If “NO DISC” appears in the
display window, press and hold PAUSE/STEP
(
X
) for more than ve seconds to be able to
select a system. (AUTO/ PAL/ NTSC)
Radio Operations
Be sure that both FM and AM aerials are
connected. (Refer to the page 15)
Listening to the Radio
1. Press FUNCTION until FM or AM (MW)
appears in the display window.
The last received station is tuned in.
2. Press and hold
TUN.(-/+) for about two
seconds until the frequency indication
starts to change, then release. Scanning
stops when the unit tunes in a station.
or
Press
TUN.(-/+) repeatedly.
3. Adjust the volume by rotating
VOL. on the
front panel or by pressing VOL + or - on the
remote control repeatedly.
Presetting the Radio Stations
You can preset 50 stations for FM and AM
(MW).
Before tuning, make sure that you have turned
down the volume.
1. Press
FUNCTION until FM or AM (MW)
appears in the display window.
2. Select the desired frequency by using
TUN.(-/+).
3. Press
PROG./MEMO. a preset number will
ash in the display window.
4. Press
PRESET (-/+) to select the preset
number you want.
5. Press
PROG./MEMO.
The station is stored.
6. Repeat the steps 2 to 5 to store other
stations.
Deleting all the saved stations
1. Press and hold PROG./MEMO. for two
seconds.
“ERASE ALL” will ash up on the unit display.
2. Press
PROG./MEMO. to erase all of the
saved radio stations.
Improving poor FM reception
Press PLAY (
B
) (MO./ST.) on the remote control.
This will change the tuner from stereo to mono
and usually improve the reception.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
