17
Catalytic Liners (Optional)
Attaching the catalytic liners
When purchasing for the first time, attach the catalytic liners
as following procedures. The below pictures are the case of
side runners. For the telescopic runners, the attaching
procedures are the same as side runners.
1. Hang the catalytic liner on the
top rod of side or telescopic
runner as illustrated.
2. Place the U-form of the side or
telescopic runner between the
two screw holes as illustrated.
3. Insert and fasten the two
screws clockwise.
4. Attach the other in the same way.
To Next Page
Loading...
