Supplementary
7016D & 7024D User Guide | Supplementary 67
Speaker/Headset Mode
If you wish to connect a headset other than to the headset jack
follow the instructions below:
1. Press the button and select option [7]
SUPPLEMENTARY followed by option [5] SPK/HEADSET.
(Your screen should appear as in Fig.52).
2. Dial 1 for Speaker, 0 for Headset (Your display will show the
current setting).
3. Press the OK button.
Navigation Button Alternative:
1. Select MENU option by pressing S
2. Press OK to select option 2 – ADVANCED PROGRAM.
3. Use T to scroll down and select option 4 – SPK/HEADSET
PROGRAM.
4. Follow the on-screen instructions and press OK or
under OK on screen to update the changes.
Fig.52
SELECT SPEAKER/HEADSET
(1:SPK 0:HEADSET) : 1
To Next Page
Loading...
