Tethering
Tethering is a function which uses a mobile
device such as a smart phone as a modem to
connect wireless LAN devices, USB compatible
devices and Bluetooth
®
compatible devices to
Internet.
When using tethering, subscribing to a packet
pack or packet at-rate service is highly
recommended.
Enabling USB tethering
Use USB Cable A to C 02 (optional) to
connect this terminal and a PC to access to
the Internet by using this terminal as a modem.
a
Use USB Cable A to C 02 to
connect the terminal and a PC
(P224)
b
From the Home screen, "Settings" →
"Network & internet" → "Tethering"
c
Set "USB tethering" to ON
Note
• The operating environment on PC side
during USB tethering is as follows:
- OS
*
: Windows 10/Windows 8.1/Mac
OS X 10.6 or later
* We do not guarantee operations
conducted in environment with
upgraded OS or in added/changed
environment.
• A LG Mobile USB driver for USB tethering
is required. For details, refer to the
following website.
https://www.lg.com/jp/support/
software-rmware (in Japanese only)
• You can install the driver through the
"Install PC programs" screen displayed
when this terminal is connected to a PC.
• USB tethering can be used together with
Wi-Fi
®
tethering and Bluetooth
®
tethering.
179
Settings
To Next Page
Loading...
Need help?
General
