Enabling Bluetooth
®
tethering
Up to four devices can access to the Internet
simultaneously by using this terminal as a
modem.
a
From the Home screen, "Settings" →
"Network & internet" → "Tethering"
b
Set "Bluetooth tethering" to ON
Note
• Pairing with this terminal is required to
use Bluetooth
®
tethering.
For details, refer to "Pairing/Connecting
with Other Bluetooth
®
Device" (P221).
• Bluetooth
®
tethering can be used
together with USB tethering and Wi-Fi
®
tethering.
Setting Access Point
Access point for connecting the Internet (sp-
mode) is already registered. You can add or
change it if necessary.
For details about sp-mode, refer to NTT
DOCOMO website.
https://www.nttdocomo.co.jp/service/spmode/
(In Japanese only)
If you want to use mopera U or Business
mopera Internet, add an access point of either
provider manually.
For details about mopera U, refer to mopera U
website.
https://www.mopera.net/ (In Japanese only)
Checking the access point in use
a
From the Home screen, tap
"Settings" → "Network & internet" →
"Mobile networks" → "Access Point
Names"
181
Settings
To Next Page
Loading...
