LG Style 3 - Fingerprints; Usage precautions for fingerprint sensor; Privacy

Fingerprints
Setting ngerprints
Fingerprint authentication is an authentication
by ngerprint sensor. Putting your nger
registered on the ngerprint sensor, unlock the
screen by ngerprint authentication.
■ Precautions for using ngerprint
authentication
• This function is designed to authenticate
using the characteristics information of
ngerprint image. For this reason, user with
ngerprint that does not provide enough
characteristics information may not be able
to use the ngerprint authentication.
• Authentication performance (how successfully
your ngerprint can be recognized when
you touch the ngerprint sensor properly)
varies depending on the condition of your
ngers. Fingerprint registration may fail or the
authentication performance may decrease if
your ngers have any of the conditions listed
below. Note that you may be able to improve
the authentication performance by wiping or
washing your hands, using a di󱐯erent nger for
authentication, or registering a larger area of
your ngerprint.
- Wrinkled or wet or sweated (for example,
after you take a bath)
- Extremely dry
- Sweaty or greasy
- Dirty with mud, oil, or other contamination
- Rough or injured (for example, cut or
inamed)
- Worn so much that the ngerprint is unclear
- Totally di󱐯erent in texture than when you
registered your ngerprint
• Fingerprint authentication technology does
not guarantee completely accurate personal
authentication or identication. Please note
that DOCOMO assumes no responsibility
for any damages resulting from using the
terminal by the third party, or inability to use
the terminal.
■ Usage precautions for ngerprint sensor
• Do not strike the ngerprint sensor or give a
hard shock. Do not press hard with a pointed
objects, hard objects, etc. May cause failure
or damage.
• Do not attach a sticker or paint with ink etc.
on the ngerprint sensor.
• Dirt of dust, sebum, etc. may make ngerprint
scanning di󱐰cult or reduce the authentication
performance. Clean the surface of the
ngerprint sensor from time to time.
192
Settings