Liebert AC4 - Page 96

Setup Operation - Restart Delay
SETUP OPERATION
Select operation to edit
OPERATIONSTATE
1=AUTO SEQUENCINGOFF
2=STANDBY TESTINGOFF
3=FAILED STANDBYN
4=HOLD DELAY10:00
5=RESTART DELAY00:06
6=RETURN TO SETUP MENU
7=RETURN TO MAIN MENU
SELECT A NUMBER:5
>DELAY BEFORE STARTUP UNIT(MM:SS)?
>[00:06]
>[
>COMMAND SUCCESSFUL
Override Output
For details on this feature, see Override Output on page64.
Override Output
OVERRIDE OUTPUT
Manually override
an output point
Select output to override
OUTPUT CONTROL
1=DEVICE_1AUTO********************************
2=DEVICE_2AUTOAUTO = CONTROL BY PANEL
3=DEVICE_3FORCE ONFORCE ON = FORCE ON BY OPERATOR
4=DEVICE_4FORCE ONFORCE OFF= FORCE OFF BY OPERATOR
5=RETURN TO SETUP MENU********************************
6=RETURN TO MAIN MENU
SELECT A NUMBER:1
>OVERRIDE OUTPUT DEVICE_1-AUTO(2),FORCE ON(1),FORCE OFF(0).
>[2]
>[
>COMMAND SUCCESSFUL
Vertiv | Liebert® AC4 User Manual | 96