Liebert Nfinity User Manual

25
UPS Status Screen
From the Main Menu the user may select UPS Status and press . Once at the UPS Status Screen, the
user may access any information on the present condition of the UPS. Note the chart below when
reviewing the UPS. Any underlined text indicates measured parameters.
UPS Status
UPS Status
Present Load
Redundant Status
Battery Status
Volts/Amps/kVA
3 phase input data
UPS frequency
UPS information
Module information
Main Menu
> UPS Status
UPS Configuration
Display Date/Time
Event Log
Alarm Log
Transfer to Bypass
Module Replacement
Tools
Redundant Status
Redundant Status
PMs Installed xx
PM:N+1 redundant
SC:redundant/(non-redundant
Battery Status
Battery Status
Voltage (VDC) xxx
Capacity % xxx
Status: charging
BMs Installed xx
Ext batt present No.
Discharge count: xxxx
Batt Usage: Hr xxxx.x
Volts/Amps/kVA
Input Output
--- VAC xxx VAC
--- A xxx A
--- kVA xx.x kVA
3 Phase Input Data
(V) (A)
Input A xxx xxx
Input B xxx xxx
Input C xxx xxx.
UPS Frequency
UPS Frequency
Input Hz=xx.x
Output Hz=xx.x
UPS Information
UPS Information
UPS ID: xxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxx
Module Information
Main Control
S/N: xxxxxxxxxxxxxxx
FW ver: xxxx
Redundant Control
S/N: xxxxxxxxxxxxxxx
FW ver: xxxx
User Interface
S/N: xxxxxxxxxxxxxxx
FW ver: xxxx
Power Module
S/N: xxxxxxxxxxxxxxx
FW ver: xxxx
Battery Module
S/N: xxxxxxxxxxxxxxx
FW ver: xxxx
Present Load
On Mains/Utility
Output: kVA xx.x
Output: kW xx.x
Output: pf xx.x

Liebert Nfinity Specifications

General

Brand	Liebert
Model	Nfinity
Category	UPS
Language	English