Liebert Nfinity User Manual

31
UPS Configuration Screen - Service Mode Menu
Service Mode contains site identification information about the UPS system. The data is entered by Liebert
Global Services (LGS). To view the data, go to the Main Menu, select UPS Configuration and press .
Next, select Service Mode and press .
Set Site ID: Press to return to the Service
Mode menu. Scroll to Set Site ID and press to
display the screen shown below.
Set Tag Number:
Press to return to the
Service Mode menu. Scroll to Set Tag Number and
press to display the screen shown below.
Display Date/Time
This feature shows the current date and time. At the Main Menu, select UPS Configuration and press .
Next, select Display Date/Time and press
Main Menu
UPS Status
> UPS Configuration
Display Date/Time
Event Log
Alarm Log
Transfer to Bypass
Module Replacement
Tools
UPS Configuration
UPS Configuration
Review Settings
Change Settings
> Service Mode
Service Mode
Service Mode
> Set Site ID
Set Tag Number
ES
C
Set Site ID
-
Service Mode
Service Mode
> Set Site ID
Set Tag Number
ES
C
Service Mode
Service Mode
Set Site ID
> Set Tag Number
Set Tag Number
-
Display Date/Time
Date/Time
xx/xx/xxxx xx:xx:xx
mm/dd/yyyy hh:mm:ss
Main Menu
UPS Status
UPS Configuration
> Display Date/Time
Event Log
Alarm Log
Transfer to Bypass
Module Replacement
Tools

Liebert Nfinity Specifications

General

Brand	Liebert
Model	Nfinity
Category	UPS
Language	English