Liebert Nfinity User Manual

26
UPS Configuration Screen - Review Settings Menu
Follow this procedure to review your UPS configuration settings. Starting at the Main Menu, select UPS
Configuration and press . Next, select Review Settings and press . Any underlined text indicates
factory default values.
UPS Configuration
UPS Configuration
> Review Settings
Change Settings
Service Mode
Main Menu
UPS Status
> UPS Configuration
Display Date/Time
Event Log
Alarm Log
Transfer to Bypass
Module Replacement
Tools
Frequency Settings
Frequency Settings
Frequency Hz: 50
Sync Range Hz: +/- 5.0
Slew Range Hz/S: 3.0
Review Settings
Voltage
Frequency
Battery
Alarms
Service Contact
Auto Restart
UPS Shutdown Delay
Remote Shutdown
External Battery
Bypass Alarm Mode
Intelli-Battery Cab
Air Filter Reminder
Battery Settings
Battery Settings
Test intrvl weeks: 2
on Wed
06:00
Low Batt Warn min 02
Alarm Settings
Alarm Settings
Redundant Alarm:
Enabled/Disabled
Max Load: xx.x/(Disabled
Service Contact
Service Contact
Liebert Corporation
WWW.LIEBERT.COM
Auto Restart
Mode: Enable/Disable
Batt % 25
%
Delay 10
Voltage Settings
Voltage Settings
Input 230
LNE
Remote Shutdown
Remote comm shutdown
Mode: Enable
External Battery
External Battery Config
Amp.Hr 0000
Charge (A)00.0
Bypass Alarm Mode
Bypass Alarm Mode
Mode: Enable
Intelli-Battery Cab
Intelli-Batteries
0
Air Filter Reminder
Air Filter Reminder
Mode:xx weeks/Disabled
UPS Shutdown Delay
UPS Shutdown Delay
120
seconds

Liebert Nfinity Specifications

General

Brand	Liebert
Model	Nfinity
Category	UPS
Language	English