REDCAT User Manual
REDCAT User Manual | 16
Below are instructions on how to connect an external audio device
like a TV, VCR, DVD, MP3 or computer directly into the REDCAT.
AUDIO INTEGRATION (cont’d)
2. Connect a patch cable (not included)
from the audio source into the
Computer or DVD/VCR input jack on
the bottom of the REDCAT.
NOTE! Be careful to not to set the volume too high, as this can distort the speaker
and potentially cause damage.
1. Turn the
Computer or
DVD/VCR volume on
the REDCAT all the
way down.
REDCAT volume controls push in and lock to prevent
accidental adjustment.
3. With both the REDCAT and audio source power on,
adjust the corresponding volume control until the
desired level is achieved.
To Next Page
Loading...
Need help?
General