REDCAT User Manual
21 | REDCAT User Manual
4. While speaking in a
normal voice, increase
the B VOLUME level
until your voice is barely
audible. REMEMBER: This
equipment is designed to
supplement and distribute
the user’s voice so they
are able to speak in a
conversational tone. Having
the volume set too high
will result in feedback and
listener fatigue.
2. Turn on the HM-70 by sliding the switch to
the top position.
INITIAL SET-UP: OPTIONAL HM-70
3. Grip the barrel in the center section.
Avoid covering the infrared emitters
circling the base. This could interrupt
signal transmission.
1. Ensure the REDCAT is ON. The RED
LED on the switch will glow.
To Next Page
Loading...
Need help?
General