REDCAT User Manual
REDCAT User Manual | 20
4. While speaking in a
normal voice, increase
the B VOLUME level
until your voice is barely
audible. REMEMBER: This
equipment is designed to
supplement and distribute
the end user’s voice so
they are able to speak in a
conversational tone. Having
the volume set too high
will result in feedback and
listener fatigue.
2. Turn on the LT-71 and set the operating
channel to “B”.
INITIAL SET-UP: OPTIONAL LT-71
3. Slip the LT-71 with lanyard around the neck
and position the top of the microphone just
below the collarbone. NOTE: Positioning
of the LT-71 is critical for proper volume
adjustment.
1. Ensure the REDCAT in ON. The RED
LED on the switch will glow.
To Next Page
Loading...
Need help?
General