EasyManuals Logo

LightSpeed Technologies Redcat User Manual

LightSpeed Technologies Redcat
42 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #27 background imageLoading...
Page #27 background image
REDCAT User Manual
23 | REDCAT User Manual
Microphones can be left in the charger for up to two weeks without
degradation to battery life
A full charge will be attained in 8-10 hours
Fully charged Lightspeed microphones will last over 7 hours
1. Ensure that the LT-71 is turned OFF.
2. Make sure the cradle charger is plugged into a wall outlet. Connect one end of
the charging cable into the jack labeled CHARGER on the side of the LT-71 and
plug the other end into the charging jack on the rear of the REDMIKE cradle
charger. The LT-71’s rechargeable batteries are factory installed. The LED on the
front of the LT-71 will glow RED when charging.
3. Leave the LT-71 plugged in overnight (8–10 hrs.) to obtain a full charge.
CHARGING THE OPTIONAL LT-71
Helpful Hint

Other manuals for LightSpeed Technologies Redcat

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the LightSpeed Technologies Redcat and is the answer not in the manual?

LightSpeed Technologies Redcat Specifications

General IconGeneral
BrandLightSpeed Technologies
ModelRedcat
CategoryStereo System
LanguageEnglish