LightSpeed Technologies Redcat User Manual

REDCAT User Manual
25 | REDCAT User Manual
OUTPUT TO ASSISTIVE LISTENING DEVICE (ALD)
1. Turn the ALD (Assistive
Listening Device) volume
control all way the down.
2. Determine the size and
type of audio input jack
on the device as many
manufacturers’ products
differ in connector size
and shape. The Lightspeed
LES-370 Personal FM
System requires a 3.5mm
to 3.5mm patch cable
(part# CA-MMC3535, not
included).
3. Connect a patch
cable from the ALD’s
microphone jack or AUX
input to the 3.5mm
audio jack labeled
“ALD OUT” on the side
of the REDCAT.
4. Adjust the volume
control on the ALD’s
receiver to maximum
output. NOTE: This is
to set the maximum
allowable signal from
the REDCAT.
5. With the REDCAT and
ALD turned on, speak
into the REDMIKE and
slowly adjust the ALD
volume control until the
appropriate audio level is
attained in the ALD’s
receiver headphones.

LightSpeed Technologies Redcat Specifications

General

Brand	LightSpeed Technologies
Model	Redcat
Category	Stereo System
Language	English