Linak 239 Series User Manual

Instruction Manual for TECH-system type 239
______________________________________________________________________________
Page 4 of 39 june 2020 ver. 09
LINAK Danmark A/S - Mønstedsvej 9 8600 Silkeborg - Telefon 86803611 - www.linak.dk
The equipment is not suitable for use in the immediate vicinity of a flammable, anaesthetic mixture
involving air, oxygen or laughing gas (nitrous oxide).
Environmental conditions:
Operating:
Temperature
Relative humidity
Atmospheric pressure
+5°C to +40°C
20% to 90% @ 30°C – not condensing
700 to 1060 hPa
Storage:
Temperature
Relative humidity
Atmospheric pressure
-10°C bis +50°C
20% to 90% @ 30°C – not condensing
700 to 1060 hPa
Warning!
The following applies if the actuator is used for traction in an application that involves a
risk of personal injury:
It is the manufacturer of the application who is responsible for implementing appropriate
safety measures designed to prevent personal injury in the event that the actuator fails.
Warning!
Please note that any application in which the actuator is involved must not feature any risk
of personal injury, e.g. a risk of crushed fingers.
Warning!
The plastic components in the system cannot withstand cutting oil.

Linak 239 Series Specifications

General

Brand	Linak
Model	239 Series
Category	Controller
Language	English