To Next Page
J
Jerry HoweAug 5, 2025
What to do if my Linak 239 Controller is overheating?
- RRichard ClarkAug 5, 2025
If your Linak Controller is overheating, stop the system and wait until it cools down.
What to do if my Linak 239 Controller is overheating?
If your Linak Controller is overheating, stop the system and wait until it cools down.
What to do if Linak 239 is disconnected on account of over current?
If the Linak Controller is disconnected due to over current, the issue might be caused by a too heavy load. Try releasing some of the load from the actuators. Also, verify that the value parameter 5 is correct.
How to fix deviation in pulses of Linak 239 Controller?
To fix a deviation in pulses in the Linak Controller, initialize the system.
General| Brand | Linak |
|---|---|
| Model | 239 Series |
| Category | Controller |
| Language | English |
Details warranty coverage and conditions for LINAK products.
Provides essential safety guidelines for installation, use, and maintenance.
Specifies operating and storage conditions including temperature and humidity.
Overview of the TECH-system type 239, its components, and functionality.
Details specifications and versions of the TR-EM-239 motor control unit.
Lists compatible LINAK actuators for the TECH-system.
Lists compatible LINAK control devices for the TECH-system.
Instructions on how to fit the various versions of the motor control unit.
Guide on installing the EM-311-DK DC-DC converter.
Detailed wiring diagram and terminal descriptions for the motor control unit.
Guidelines for correctly installing LINAK actuators.
Overview of actuator cable types and connections.
Detailed diagrams for connecting various LINAK actuator types.
Wiring diagrams for different LINAK control devices.
Diagrams for connecting to PLC and manual control units.
Instructions for performing a service run operation.
How to read actuator position using a PLC.
Details on using the TR-EM-236 programming unit for configuration.
Lists and describes adjustable parameters for the control unit.
Detailed explanation of each adjustable parameter and its options.
Procedure for initialising the system for correct actuator operation.
Defines intended use and lists inappropriate applications and conditions.
Method for operating actuators individually for testing or adjustment.
How to check system status and values using the programming unit.
Interpreting error codes indicated by the red LED on the PCB.
Procedure for resetting errors after troubleshooting.
