Linak 239 Series User Manual

Instruction Manual for TECH-system type 239
______________________________________________________________________________
Page 8 of 39 june 2020 ver. 09
LINAK Danmark A/S - Mønstedsvej 9 8600 Silkeborg - Telefon 86803611 - www.linak.dk
Actuator (pos.3)
The system is compatible with the following LINAK actuators:
• Actuator LA12 w/reed switch
• Actuator LA14 w/hall sensor
• Actuator LA20 w/dual hall sensor
• Actuator LA23 w/hall sensor
• Actuator LA23 w/dual hall sensor
• Actuator LA25 w/hall sensor
• Actuator LA28 w/reed switch
• Actuator LA30 w/reed switch
• Actuator LA31 w/reed switch
• Actuator LA32 w/reed switch
• Actuator LA35 w/hall sensor
• Actuator LA36 w/hall sensor
• Actuator LA36 w/dual hall sensor
• Actuator LA37 w/dual hall sensor
• Actuator LA40 w/dual hall sensor
• Column LP2 w/reed switch
• Column BL1 w/hall sensor
(see the appropriate product data sheets for additional information)
Control device: (pos.2)
The system is compatible with the following LINAK control device
• Desk-mounted operation, type DP1T: Order no. DP1T00-000006
• Desk-mounted operation, type TP1: Order no. TP1010+00
• Hand-held operation, type HB41T: Order no. HB41T00-000009
• Hand-held operation, type HB61: Order no. HB61T00-000009
• Rocker switch for building in: Order no. TR-1939.3314-00
Other types of control devices can also be used.

Linak 239 Series Specifications

General

Brand	Linak
Model	239 Series
Category	Controller
Language	English