Periodic inspection of trucks
The head of the establishment concerned must conduct
periodic general inspections of the truck, or arrange for
these to be conducted, in order to ensure early detection
of any potentially dangerous deterioration. (Article R. 233-
11 of the working code introduced by Decree No. 93-41.)
The Order of 9 June 1993 gives the list of apparatus
affected, as well as the content and intervals of the inspec-
Stacker trucks and trucks with an on-boar
inspected every six months by an authorised person. The
results of these inspections must be recorded in a written
The small walking pallet trucks are exempt from these
Operating recommendations
Your new truck is ready for immediate use. However, we
recommend that you avoid subjecting it to excessively
intensive use during the first 50 hours of service.
During the initial period of service, and after every wheel
change, wheel nuts should be checke
several days in succession.
The torque setting for crosswise tightening of the wheel
nuts is given in the maintenance section.
Daily checks prior to operation *
Before each shift, it is essential for the following operational
checks to be conducted on the equipment, with particular
reference to safety fittings.
These checks are detailed in the following pages.
Checks prior to initial operation
The last 3 operations above are detailed in the mainte-
In the event of any anomaly, notify the
charge immediately. Do not use the equipment.
https://www.besttruckmanuals.com/
To Next Page
Loading...
