Linde T 16 - Slope Operation and Steering

3
6
0
8
0
4
2
5
1
1
-
0
5
0
4
2
1
D
r
i
v
i
n
g
U
s
e
Turning angle
Turning angle .............................................180°
The turning radius (Wa) depends on the fork length. (See
technical specifications.)
Starting on a slope
When it is necessary to stop and then r
estart on an incline,
proceed as follows:
When starting on a slope, press the butterfly valve in the
required direction with the tiller in position 2 (handbrake
on).
Power is then applied to the motor at low voltage and
current.
Tilt the tiller into the driving position.
Steering
A robust and ergonomic tiller equipped with two grips
directly steers the traction wheel
https://www.besttruckmanuals.com/