Linde T 16 - 500-Hour Maintenance Intervals

3
6
0
8
0
4
2
5
1
1
-
0
5
0
4
Maintenance
Maintenance every 500 hours
Checking and adjusting the belt tension
With the truck lifted about 20 cm off the ground and then put
on blocks:
-
Rem
ove t
he ca
sing
cove
r fro
m und
ern
eath
.
-
Rem
ove t
he bo
lt (2
) and
the
wash
er (3
).
-
Count
the n
umber
of not
ches on
the te
nsioner
rack (6
).
-
Refer
this
number
to the
«notch»
curve a
nd read
the re
-
tensioning torque.
-
Tighte
n the
tension
er nut
(5) by
turning
it clo
ckwise w
ith
a torque wrench to the torque determined, whilst turning
the motor at low speed to accurately position the belt.
NB
Make sure that the roller (4) is not tou
ching the bolt (2). If
it is, remove the bolt (2) and the wa
sher (3) and move them
one hole towards the right. There are three possible bolt
positions.
The ratchet (1) must lock correctly.
Checking and adjusting the brake control
-
Check t
he tru
ck brak
ing. I
f it
proves
to be
unsatis
factory,
adjust as follows:
-
Remove
the f
ront c
over,
remove
the f
lexibl
e cover
, and
remove the reduction gear cover.
-
Loo
se
n t
he
lo
ck
nut
(1
).
-
With t
he til
ler in
the wo
rking po
sition,
tighte
n the
screw (2
)
until the lever (3) grips the jaws of the brake drum.
-
Back of
f the
screw (2)
by two
or thre
e turns
until
the bra
ke
pulley rotates freely.
-
Ti
gh
te
n th
e lo
ck n
ut (
1).
-
Release
the t
iller
and ch
eck th
at th
e truck
is corr
ectly
braked in this position.
NOTE
We recommend that this operation be carried out by our
network.
-
Tig
hten t
he bol
t (2) f
itt
ed wi
th it
s wash
er (3)
.
Tightening torque: 24 Nm.
-
Fix th
e casi
ng cov
er wit
h the at
tac
hme
nt scr
ews.
Tightening torque: 10 Nm.
IMPORTANT: When installing a new belt, follow the steps
indicated above, having fisrtly carried out the following:
-
appl
y an init
ial te
nsio
n of 17Nm o
n the sp
rock
et (4)
.
-
coun
t t
he
num
ber
of
notc
hes
and
-
appl
y the f
inal
tor
que a
s per t
he gr
aph
.
https://www.besttruckmanuals.com/