Linde T 16 - Travel Controls and Safety Features

3
6
0
8
0
4
2
5
1
1
-
0
5
0
4
2
3
1
D
r
i
v
i
n
g
U
s
e
Forward travel
-
Gradual
ly pre
ss the
lower
part
of th
e acce
lerator
control
(1) with the thumb (rotation of accelerator control in
direction 2).
-
The sp
eed of t
he tru
ck is pro
port
ion
al to th
e press
ure
exerted.
NB
When starting on a slope, press the
accelerator control
in
the required direction with the tiller in position 2 (truck
braked). Power is then applied to the motor at low voltage
and current.
Tilt the tiller into the driving position, in
order to remove the
brake and start off.
Reverse travel
-
Gently
press t
he upper
part of
the acce
lerator
control
with
the thumb (rotation of accelerator control in direction 3).
-
The p
allet
truck
accelerat
es in
reverse,
in pro
portion
to
the pressure exerted.
Reversing the direction of travel
-
Release
the a
ccelerat
or con
trol
and op
erate
it i
n the
opposite direction.
Reversal of the direction of travel can be initiated whil
e the
truck is moving.
In this case the appliance will first be braked electrically
to a standstill and will then restart in the opposite direction.
Safety reverse button
In order to protect the driver from being trapped between
an obstacle and the appliance, the end of the tiller is fitted
with a safety reverse button (1).
As soon as the flap is pushed in, the machine immediately
stops by automatic inversion of the direction of movement.
To rearm the safety system, place the tiller
in position 2 or
3 again, before reactivating the accelerator control.
https://www.besttruckmanuals.com/