In order to keep your handling truck
working order, it must be regularly checked and serviced
in accordance with this manual.
Servicing must be carried out only by qualified and
This work can be carried out by your local LINDE
representative under a service contract. If you prefer to
carry out this work yourself, we recommend that the first
three services should be conducted by the local
representative in the presence of your maintenance per-
sonnel, so that your staff can be given appropriate training.
During all servicing work, park the truck on level
ground in an area set aside for this purpose.
Chock the wheels, remove the key and
On completion of any servicing work, always car
on the truck to ensure correct operation.
You must not make any alteration to your truck, fit any
accessory or make any structural modification without the
manufacturer’s prior approval.
If the truck is used in difficult conditions (extremes of hot
or cold, dusty environments, etc.), the service intervals
Before carrying out any lubrication, changing filters or
working on the hydraulic system, carefully clean the exterior
Use clean receptacles for lubrication operations.
Comply with regulations for the use of the
Use only lubricants which meet the relevant
See the table of recommended lubricants.
Inspection and maintenance after first
Descriptions of these tasks are given in the following
https://www.besttruckmanuals.com/
To Next Page
Loading...
