LINET AVE 2 - Transportation of the Delivery Table from One Place to Another

30
4.4.2 Transportation of the delivery table from one place to another
Follow the instruction below:
 Do not move the table over cables.
 Power cable of the delivery table must always be fixed in the hook (provided on front side of the
table).
 Unlock the castors before travelling (see Castor control and delivery table transportation).
 Do not move the table on floors with unsuitable surfaces
The delivery table can be transported from one hospital to another without the pallet and/or further
transport aids.
1) Lift the back in an angle of approx. 30°
2) Fold down protection elements
3) Turn leg rests to initial position (i.e. parallelly with PD) ,to the seat section
4) Slide in leg holders to initial position
5) Bring PD to parking position
6) Bring hand holders to initial position
7) Tilt infusion stand holder to initial position
8) To remove the covers, bring the table to the upper position.
9) Load the bed to transport car, ramp
10) Brake the bed
11) Tie down the bed