LINET AVE 2 - Technical Parameters

64
8.2 Technical parameters
Total length of the lying area (including the foot section)
83,54 inch
Minimum length in the default setting (without the foot
section)
61,81inch
Full with with the side rails in active position
38,58 inch
Full with with the side rails in parked position
37,79 inch
Maximum height of the seat section (Trendelenburg 40)
45 inch
Upholstery width (maximum)
35,04 inch
Upholstery length (maximum)
80,71 inch
Height of the supporting area including upholstery
(seat section)
Minimum
23,62 inch
Maximum
41,34 inch
Vertical lift
17,72 inch
Upholstery thickness:
Foot section
2,56 inch
Back section
3,94 inch
Seat section
3,94 inch
Adjustment angles:
Back section positioning angle
-10°/+70°
Seat section positioning angle
0°/+18,5°
Trendelenburg position
-10°
Leg rests vertical adjustment angle
0°/+143°
Leg rests horizontal adjustment angle
+60°
Foot section adjustment angle
0°-22°
Castor size/diameter
5,91 inch
Stickers, labels material
polymeric PVC foil
Maximum patient load
240 kg (529 lb)
Safe operational load
255 kg (561 lb)
Overall product weight (without accessories)
245 kg (540 lb)
Overall weight of the upper part of the birthing bed
including accessories
140 kg (308 lb)
Overall weight of the lower part of the birthing bed
including accessories
96 kg (211,2 lb)
Permitted back section load (125 mm from the edge)
150 kg (330 lb)
Permitted foot section load (125 mm from the edge)
150 kg (330 lb)
Permitted leg rest load
100 kg (220 lb)
Permited load of side rail
75 kg (vertical press)
(165 lb)
Permitted load of supporting bar
150 kg (330 lb)
Noise level
Less than 65 dB (A)
Nominal value of the fuse in the control unit (220-240 V)
T 3,15 AL_250V
Nominal value of the fuse in the control unit (100/120V)
6,3 AL_125V