Please clean the whole bed with regular disinfecting solutions before using it and cover all the upholstery
of the bed with waterproof sanitary protection to avoid the skin contact of the woman in labour with the
upholstery.
Do not use any automated cleaning or disinfection methods!
Get the chair into its highest position and adjust its lying surface horizontally.
For basic cleaning use a soft cloth and only a mild solution of an alkali multi-purpose cleaner (soap water).
For disinfection, we recommend using standard preparations for disinfection of surfaces based on for
example quaternary ammonia compounds, aldehyde preparations, peroxy-compounds and preparations
containing active chlorine. The dilution ratio recommended by the producer of these products must be
followed at all times!
Do not use any abrasive washing aids or ketone based solvents (such as Nitro, Acetone, etc.).
By using an inadequate amount of water you risk water leakage into the motor parts of the product, which
may damage the electric wiring and render the product not functional.
In case of improperly performed cleaning and disinfection, there is a risk of nosocomial infection.
We recommend performing proper cleaning according to the hygienic standards of medical facilities.
Put the upholstery on dry bed areas only.
When cleaning, place the footrest upholstery on the flat side.
This medical device with all its parts and accessories is not designed to undergo sterilization.
To Next Page
Loading...
