LINET AVE 2 - Introduction

5
1 Introduction
Please read carefully the whole instruction manual, which is designed to familiarize you with the correct
use and the parameters of your new birthing bed. Please always follow the instructions contained in
this manual and use the bed only in accordance with these instructions.
Please keep these instructions near the bed throughout its operation. Every person operating the birthing
bed AVE 2 must read and understand the contents of these instructions.
Very important information is marked throughout the manual by the following symbols:
Logo
Meaning
The upholstery meets the requirements on resistance to ignition
according to BS 7177 in the Medium hazard category.
The upholstery meets the requirements of BS EN 597-1, BS 6807
– resistance to ignition sources 5
Pictogram
Meaning
Warning:
Dangerous electric voltage
This symbol introduces any information that may help
you avoid operative problems
Type B applied parts
Serial number
REF
Type number explanation
Int x/y
Duty Cycle (2 minutes ON/18 minutes OFF)
IP
Design protection against water ingress, hazardous
contact and the ingress of foreign objects according to
IEC
Safe operational load
Safe patient load
Overall product weight
Battery marking
Producer
Date of production