5.1.2 Lowering procedure
To initiate lowering, push the trigger in the marked direction with one hand, then lower the rail to the lowest
position possible. The parking position is suitable for birth mother to get easily on the bed, eventually for
better access to the patient during birth.
5.1.3 Lifting procedure
To lift into active position, push the trigger in the marked direction with one hand, then lift the rail to the
highest position possible. The rail locks in the active position automatically.
Always check functionality of the side rails before use.
Upon regular service check-up it is necessary to check and adjust side rails.
Siderails are intended to be a reminder, not a patient restraining device.
The siderails should always be in a full upright position and latched when a patient is unattended.
To Next Page
Loading...
