Chassis cleaning
Be extremely cautious when cleaning the chassis parts!
Prior to cleaning, always disconnect the device from the power supply.
The bed must not be used without a properly fitted plastic chassis cover!
By using an inadequate amount of water you risk water leakage into the motor parts of the product, which
may damage the electric wiring and render the product not functional.
The chassis design allows lifting its plastic cover to render easier hygiene maintenance.
1. Lift the bed to its highest position and disconnect it from power supply. Lift the left chassis plastic
cover and clean dirty areas.
2. After lifting the left cover, you can lift the right plastic cover as well and clean the chassis. Make sure
not to interfere with the electronics.
3. After cleaning, first fit the right cover, then the left cover.
To Next Page
Loading...
