D9U001ES1-0110_0218
8 Putting into Service
WARNING!
Risk of injury when working on the bed!
► Ensure that the castors are locked prior to assembly, disassembly and maintenance.
CAUTION!
Material damage due to incorrect assembly!
► Ensure that assembly is performed exclusively by manufacturer´s customer service or trained hospital personnel.
CAUTION!
Material damage due to incorrect use!
► Do not use pedals for lifting or lowering if the bed is not in horizontal position!
NOTE For safe, easy handling, Linet ® recommends having two technicians assemble the bed.
Set up the bed as follows:
► Unpack the bed.
► Check the delivery (see Scope of Delivery and Sprint 100 Variants).
► Ensure that all of the required mechanisms are available on site.
► Raise siderails up.
► Install accessories.
► Set up the bed exclusively on a suitable oor surface (see Transport).
HOOKS ON THE ACCESSORY RAIL (optional)
If the bed is equipped with accessory rail on the head end / foot end hooks on the accessory rail are delivered in the safety position.
In order to use the hooks remove them and place them on the accessory rail from the outer side (reversely).
To Next Page
Loading...
Need help?
General
