LINET Sprint 100 User Manual And Technical Description

D9U001ES1-0110_02 53
13 Cleaning/Disinfection
WARNING!
Risk of injury due to accidental bed movement!
► Ensure pedals will not be pressed accidentally during cleaning.
WARNING!
If oil leaks from hydraulic units or gas springs contact the manufacturer´s service department!
CAUTION!
Material damage due to incorrect cleaning/disinfection!
► Do not use washing tunnels to clean the bed.
► Do not use pressure or steam cleaners.
► Follow the instructions and observe the dosages recommended by the manufacturer.
► Ensure that disinfectants are selected and applied exclusively by qualied hygiene experts.
► Respect used materials during cleaning and desinfection! For information see the following table.
Bed components Materials used
Head, Foot and Side Covers Polypropylene
Siderails Powder Coated Steel + Polypropylene
Mattress Support Platform Covers HPL
Castors Polyurethane + Steel + Polyamide
Frame structure Powder Coated Steel
Column Cover PVC
Undercarriage Cover ABS
Corner Covers Polypropylene
Corner Bumpers Polypropylene
Siderail Release Handles Powder Coated Steel + PVC
For safe and gentle cleaning:
► Do not use any strong acids or bases (optimum pH range 6 - 8).
► Exclusively use detergents that are suitable for cleaning medical equipment.
► Do not use abrasive powders, steel wool, or other materials and cleaning agents that might damage the mattress replace
ment system.
► Never use any corrosive or caustic detergents.
► Never use detergents that deposit calcium carbonate.
► Never use detergents with solvents that might affect the structure and consistency of the plastics (benzene, toluene,
acetone, etc.).
► Observe local directives regarding infection control.
► Make sure any cleaning agent used is approved by:
■ the facility in which the mattress replacement system is to be used.
■ by the EPA (Environmental Protection Agency) of the country in which the mattress replacement system is to be used.
13.1 Cleaning (Sprint 100)
Prepare for cleaning as follows:
► Put the Mattress Support Platform in the highest position.
► Adjust the Backrest and Thighrest so that the reverse sides are accessible.
► Move the bed to the location where it will be cleaned.
► Lock the brakes on the bed.

LINET Sprint 100 Specifications

General

Brand	LINET
Model	Sprint 100
Category	Medical Equipment
Language	English