D9U001ES1-0110_0256
15 Maintenance
WARNING!
Risk of injury when working on the bed!
► Ensure that the castors are locked prior to assembly, disassembly and maintenance.
WARNING!
Risk of injury due to defective bed!
► Have a defective bed repaired immediately.
► If the defect cannot be repaired, do not use the bed.
CAUTION!
Material damage due to incorrect maintenance!
► Ensure that maintenance is performed exclusively by manufacturer´s customer service or technicians trained by
manufacturer.
► If the defect cannot be repaired, do not use the bed.
NOTE Linet ® recommends attaching the maintenance plaque to the bed.
To keep the bed functioning correctly, ensure that the following maintenance work is performed at the correct intervals.
15.1 Monthly maintenance
► Check all movable parts for wear.
15.2 Maintenance every 3 months
► Check function of brake lever.
► Check bolts on castors and tighten them if necessary.
15.3 Maintenance every 12 months
15.3.1 Spare Parts
The serial label contains information for claims and ordering replacement parts.
Hydraulic unit is not divisible part. One hydraulic unit is one spare part.
Information about spare parts is available from:
■ Manufacturer´s customer service
■ Sales
■ Our technical support department
15.3.2 Completeness
► Perform a visual check (with delivery note if necessary).
► Have any missing parts replaced.
15.3.3 Wear
► Check all bolts and tighten if necessary.
► Check all locking mechanisms.
► Check the bed for wear, scratches or rub marks.
Eliminate the cause if necessary.
► Have any defective parts replaced.
15.3.4 Functioning
► Check that all bed adjustments reach the maximum position.
► If necessary, clean, lubricate or replace any worn spots and parts.
To Next Page
Loading...
Need help?
General
