D9U001ES1-0110_02
57
15.4 Safety Checks
WARNING!
Risk of injury due to incorrect safety checks!
► Ensure that safety checks are performed exclusively by manufacturer´s customer service or authorised
personnel (certied by the manufacturer).
► Ensure that the safety checks are recorded in the service and maintenance log.
WARNING!
Risk of injury due to defective bed!
► Have a defective bed repaired immediately.
► If the defect cannot be repaired, do not continue to use the bed.
The operator is required to perform a technical safety check on the hospital bed every 12 months.
NOTE On request, the manufacturer will provide circuit diagrams, component part lists, descriptions, calibration instructions etc.
for service personnel for the repair of ME equipment designated by the manufacturer as repairable by service personnel.
15.5 Linet
®
Service Department
Our responsible Linet ® Service partners will ensure your Linet ® products are up and running when you need them. For more
information on available service support and contract offerings, please contact us at podpora.servis@linet.cz and ask for techni-
cal support. Linet ®‘s nationwide network of highly skilled service providers that are equipped to service and maintain your Linet ®
equipment at the highest level.
For service technician approved by manufacturer it is recommended to use this user manual in combination with service manual
(D9S001ES1-0101).
To Next Page
Loading...
Need help?
General
