LinMot Series E1100 - Start MC- and Application Sw with Response after Completion

L
i
n
M
o
t

LinRS Interface
13.4Start MC- and Application SW with Response after completion
Request: Start MC- and Application SW with Response after completion
Byte
Offset
Value Description
0 01h Fix ID telegram start
1 11h MACID
2 03h Data length
3 02h Fix ID start data
4 04h Sub ID: Start MC- and Application SW with response
after start completion
5 06h Main ID: Program Handling Message Group
6 04h Fix ID telegram end
Response: Start MC- and Application SW with Response after completion
Byte
Offset
Value Description
0 01h Fix ID telegram start
1 11h MACID
2 04h Data length
3 02h Fix ID start data
4 60h Sub ID: Program Handling Response
5 00h Main ID: Response Message
6 00h Communication State ok
7 04h Fix ID telegram end
Example:
Tx: 01 11 03 02 04 06 04
Rx: 01 11 04 02 60 00 00 04
The response is given after the start is completed (ca. 3s)
Page 46/59 User Manual LinRS Interface / 03/10/2017 NTI AG / LinMot