Need help?Do you have a question about the LinMot Step and is the answer not in the manual?
Explains symbols used in the manual for important notes and tips.
Discusses safety aspects related to the installation of LinMot drive systems.
Overview of the modular LinMot servo drive system, including actuators and electronic units.
Details on LinMot P linear drives as direct linear movement solutions.
Explains how to drive actuators and the different operational modes.
Covers system configuration, curve generation, monitoring, and error logging.
Describes various modes for driving actuators via analog or digital signals.
Details the different operational states of the electronic unit and state transitions.
Covers the procedure for initializing actuators without absolute measuring systems.
Provides instructions for connecting power supplies to E100/E200/E400 and E1000/E2000/E4000 units.
Lists the minimum and recommended system requirements for LinMot Talk software.
Step-by-step guide for installing the LinMot Talk configuration software.
Details the Parameter Inspector for displaying and editing unit parameters.
Covers the Oscilloscope for real-time data recording and system analysis.
To Next Page
General
