LinMot
System Overview
User Manual V1.01 3-14
3.9 Customer specific applications
The goal in the basic philosophy of LinMot
®
is to be able to cover the broadest range of
applications simply by configuring the basic system, without special customer specific
adjustments. In some cases (big series, special system environments) however customer
specific adjustments can make sense. In these cases the necessary interventions have to
be carried out by the manufacturer.
In most cases the customer specific changes will be realized in the software of the
electronic unit (‘Customized Application Software’). In most cases this will relate to the
following two requirements:
• Additional control functions
• Networking with customer specific bus systems ( CAN-Bus, RS-232)
Basic
Application
Software
Firmware
LinMot
Standard
Software
Basic
Application
Software
Firmware
Customized
Application
Software
LinMot
Customized
Software
Figure 3-9: Structure of the LinMot
®
software: The manufacturer can realize
special customizations in a special software segment (‘Customized Application
Software’).
To Next Page
Loading...
