LinMot
Introduction
User Manual V1.01 1-1
1. Introduction
This manual is organized as follows:
Please take a moment to read and get accustomed with the safety instructions. This
information is intended for your personal safety and should help in protecting the
electronic units and linear motors from possible damage.
Gives an overview of the properties and features of the single LinMot
components and
their operation.
Here you will find a description of the functionality, the different operation modes and
the technical data of the electronic unit. Further, the interfaces and the installation are
described in this chapter. This information helps you optimally embed the LinMot
products in your application.
In this chapter you will get accustomed with the functionality and possibilities of the PC
software for the configuration of the LinMot
electronic unit. Further, you will find
examples that will make the first commissioning of the system easy.
This chapter gives an in-depth description of all the parameters to which you have
access during the configuration of the LinMot
electronic unit.
Explains the error messages that are displayed by the LEDs and helps you in the
troubleshooting.
Safety notes
System description
Design and
installation
Configuration
software
Parameters
Service
To Next Page
Loading...
