LivaNova SCP - Safety features of the device

SCP System • Safety
10 CP_SEM_60-00-00.002
2.2.4 Electrical safety
◗ Electrical installations must comply with DIN VDE 0107 (for Germany) or the corresponding,
equivalent, local regulations and guidelines. Refer to the technical specifications in this respect.
◗ The pump control console must be totally powered down when switching on or off the SCP drive
unit.
◗ Check the functional safety of all electrical connections, cables and sockets regularly.
2.2.5 Safety instructions for routine maintenance
◗ Routine maintenance work must only be performed by qualified personnel.
!
◗ Disconnect the device from the power supply completely before carrying out maintenance and
cleaning work.
◗ Please adhere to the service and maintenance instructions given in these operating instructions as
well as the recommended maintenance intervals.
◗ Ensure that no liquids or cleaning agents enter the machine housing through the vents or other
openings.
◗ Use recommended cleaning agents.
◗ Repair work may only be carried out by authorised service technicians. Only original spare parts
from LIVANOVA DEUTSCHLAND GMBH may be used in order to guarantee the proper functioning of
the device.
2.3 Safety features of the device
◗ The SCP System performs a self-test during power-up. Check that all the LEDs, the 7-segment
displays and the beep alarm function correctly.
◗ Visual and audible alarms indicate when an internal error has occurred.