LivaNova SCP - Replace Drive Unit Components

SCP System • Replacing components
40 CP_SEM_60-00-00.002
5.2.2 Replace drive unit components
Motor control board (ZPR 9909 A)
It is only necessary to dismantle the motor control board if relevant error messages are displayed (e.g.
E62, E76)
Fig. 25: Dismantling the motor control board (1)
Detach the following connectors:
◗ B 8 Current supply connector (CON1)
◗ B 9 Pump control panel connection (CON2)
◗ B 10 Hall sensor connection (CON3)
◗ B 11 Motor connection (CON4)
B 9
B 10
B 11
B 8