Need help?Do you have a question about the LivaNova SCPC and is the answer not in the manual?
General| Brand | LivaNova |
|---|---|
| Model | SCPC |
| Category | Medical Equipment |
| Language | English |
Provides basic information on maintenance and repair of the Stöckert Centrifugal Pump Console System.
Explains symbols used to help the user find particular text passages within the manual.
Lists standards and regulations the device complies with, including CE marking and medical device directives.
Details intended use, instructions for use, and contraindications for the SCPC System.
Provides occupational health and safety guidelines and system-specific safety instructions for service tasks.
Outlines safety measures and precautions for modifying, repairing, or replacing system components.
Covers safety guidelines for assembling and operating the SCPC System for the first time.
Provides safety instructions for handling and cleaning the SCPC System and its components.
Details electrical safety requirements, power connection, and precautions against electromagnetic interference.
Provides an overview of the SCPC System's capabilities and functions, controlled via a touch screen.
Presents a visual overview of the SCPC System with numbered components.
Details the various modules and components of the SCPC System and their functions.
Shows detailed diagrams of individual components within the SCPC System.
Details the components and overview of the SCPC System's touch screen module.
Provides an overview and connection details for the CPU board (ZDS 2006).
Details the interface circuit board (ZIS 0202) and its connections.
Describes the card and module support assembly, including circuit boards.
Details the backplane circuit board (ZBP 2004) and its components.
Provides an overview of the battery monitoring (ZAU 2002) circuit board and its EPROM.
Details the mains monitoring (ZNU 2003) circuit board and its fuses.
Provides a brief overview of the SCPC System's menu structure for user orientation.
Illustrates the main and device menus of the SCPC System, showing parameters and values.
Explains how to access and navigate the Service menu of the SCPC System.
Details the key symbols and their corresponding functions within the SCPC Service menu.
Shows the information displayed on the Service menu pages, detailing charge and discharge parameters.
Guides the user through the process of calibrating the current sensor on the SCPC System.
Explains the procedure for updating the firmware of the serial interface (ZIS) circuit board.
Details the manual process for updating firmware using existing data files.
Describes how to calibrate the touch screen if button response is inaccurate or after component replacement.
Introduces the system's self-monitoring capabilities and how errors are displayed.
Lists non-specific errors, their possible causes, and corrective measures for the SCPC System.
Details specific error codes, their descriptions, and corrective actions for the SCPC System.
Explains issues related to the current sensor, its faults, and troubleshooting steps.
Explains how to access the modules within the SCPC System for replacement.
Provides step-by-step instructions and diagrams for opening the SCPC System casing.
Details how to unfasten and remove circuit boards from the SCPC System.
Instructions for safely removing the touch screen module from the SCPC System.
Instructions for lifting and removing the upper part of the SCPC System casing.
Steps for removing the side panel to access internal components.
Discusses battery maintenance and provides instructions for safely removing the batteries.
Step-by-step guide on how to remove and replace the mains switch.
Instructions for removing and replacing the mains filter.
Step-by-step guide on how to remove the rectifier from the SCPC System.
Instructions for removing the automatic circuit breaker.
Step-by-step guide for removing the discharge resistor.
Step-by-step instructions for disconnecting and removing the fan.
Instructions for removing the interface (ZIS 0202) circuit board from the touch screen module.
Step-by-step guide for removing the CPU board (ZDS 2006).
Instructions for replacing the EPROM on the battery monitoring circuit board.
Instructions for replacing fuses on the mains monitoring circuit board.
Instructions for replacing fuses on the backplane circuit board.
Instructions for replacing the EPROM on the CPU board (ZDS 2006).
Provides technical specifications for the SCPC System, including dimensions and operating conditions.
Details the physical dimensions, weight, and environmental operating conditions for the SCPC System.
Lists the electrical specifications, including drip-proof rating, input voltages, and power consumption.
Specifies operating voltages, power consumption, and measurement range for the temperature monitor.
Details operating voltages and power for the level/bubble sensor module.
Lists serial port settings such as baud rate, parity, and connection cable type.
Provides information on the UPS operating time and charging time.
Details the dimensions, weights, and load capacities of the SCPC trolley.
Explains the designations and icons found on the SCPC System nameplates.
Lists part numbers for the SCPC System, components, and accessories.
Lists safe usage guidelines for accessories used with the SCPC System.
Lists part numbers for individual SCPC System components used for service.
Lists part numbers for touch screen modules and related components.
Lists part numbers for the card and module support assembly components.
Presents the overall circuit diagram for the SCPC System.
To Next Page
