48
6.9.3 EV charger Connection
This inverter is ready for you to use solar energy to charge your electric car.
For more details, please refer to the LIVOLTEK EV charger user manual.
Notes: This inverter can be only connected with LIVOLTEK EV charger now.
6.9.4 Auto- Transformer Connection (Optional)
For backup power capability, this inverter enables you to split the 240 volts into two legs of 120
volt and to balance the load between the two legs by installed with LIVOLTEK auto-transformer
box for the critical loads.
For more details, please refer to the LIVOLTEK Auto-Transformer user manual.
6.9.5 Installation Verification
Check the following items after the inverter is installed.
• No other objects put on the inverter.
• All screws especially the screws used for electrical connections are tightened.
• The inverter is installed correctly and securely.
• Ground, AC, DC and Communications cables are connected tightly correctly and securely.
• Check there is no open circuit or short circuits at AC and DC terminals using multi-meter.
• Idle terminals are sealed.
• All safety warning symbols are intact and complete on the inverter.
To Next Page
Loading...
