LNS Alpha ST320 S2 - Page 89

CHAPTER 8: OPERATION 8-11
ALPHA ST320 S2
6.2. Quick preview
Page Parameter name Parameter description Access
P01 Bar stock setup
Bar diameter F0
Torque adjustment F1
P02 Product setup
Part length F0
Speed reduction distance F1
P03
Feeding speed
setup
Feeding speed F0
P04 Bar change setup BAR END position F0
P05 TOP CUT setup TOP CUT position F0
P06
Front rest and oil
pump setup
First front rest F0
Oil pump F1
Second front rest F2
P07 Safety setup
Minimum allowable feeding length when chuck is open. F0
Maximum allowable pusher moving distance when chuck is
closed.
F1
Maximum allowable feeding length when chuck is open. F2
P08 FIRST FEED FIRST FEED position F0
P09 Chuck open timer Timer for chuck open F0
P10 Dry run Barfeeder in dry run mode F0
P11
Front rest in manual
mode
Front rest in manual mode F0