Lockly Secure LUX User Manual

SECTION 3.2 11
3.2 Entering Programming Mode
To enter Programming Mode, remove the
battery compartment cover on the
interior side of the Secure to expose the
Reset and Program buttons.
Simply press the Program button to enter
programming mode.
Note: Program button will be disabled
once synced to a smart phone. Config-
ure all settings via synced smart phone.
To end Programming Mode, press the Program button anytime.
Programming Mode will automatically exit if the keypad is inactive for
more than thirty (30) seconds.
After entering Programming Mode, you
should see the screen as displayed to
the right on your Lockly™ keypad.
Follow the following steps to add,
delete, or check your Access Codes.
Program Button
Add Passcode
ModeNumber
Delete Passcode
View Passcode
Alarm Sensitivity

Lockly Secure LUX Specifications

General

Brand	Lockly
Model	Secure LUX
Category	Door locks
Language	English